ADVANCE – COMMERCIAL ROLL COMPACTOR
ADVANCE – COMMERCIAL ROLL COMPACTOR
Yes ! I am InterestedTechnical Specification
| MACHINE | ADVANCE – 200 X 150 ROLL COMPACTOR MACHINE | ADVANCE – 200 X 200 ROLL COMPACTOR MACHINE | ADVANCE – 300 X 150 ROLL COMPACTOR MACHINE | |
|---|---|---|---|---|
| Model | AE – CRC – 200 x 150 | AE – CRC – 200 x 200 | AE – CRC – 300 x 150 | |
| Output | 50 to 150 Kg. /Hr.* | 100 to 250 Kg. /Hr.* | 100 to 350 Kg. /Hr.* | |
| Roller size | DIA 200 mm x 150 mm Width | DIA 200 mm x 200 mm Width | DIA 300 mm x 150 mm Width | |
| Roller Material Used | SS-410 / O.H.N.S. (Applicable in Pharma) | |||
| Roller Plating Type | Electro Less Nickel Plating Coating (E. L.N.P.) | |||
| Optional Roller | Stainless Steel –316.(220 Grit Mirror Finish) | |||
| All Contact Part material Used | Stainless Steel- 316.(220 Grit Mirror Finish) | |||
| Non- Contact Part material Used | Stainless Steel- 304. (240 Grit Matt Finish) | |||
| Roller surface | Corrugated Type (Specific) | |||
| Optional Roller Available | Plain / Knurling / Briquetted. (S.S. – 316 / S.S. – 410 / OHNS As per Requirement.) | |||
| Roller Speed (Step Pulley drive) | 5 to 25 RPM | |||
| Optional Required Variable Speed. | Main Motor Speed Variation through AC – Variable Frequency Drive Unit. (1 To 25 RPM) | |||
| Feeder screw speed (Attach AC VFD) | 10 to 110 RPM | |||
| Roller Motor | 7.5 HP / 960 RPM / 3 Ph. / 415 V / 50 Hz. | 10.0 HP / 960 RPM / 3 Ph. / 415 V / 50 Hz. | ||
| Feeder screw Drive motor | 3.0 HP / 1440 RPM / 3 Ph. / 415 V / 50 Hz. | 5 HP / 1440 RPM / 3 Ph. / 415 V / 50 Hz. | ||
| Gear Box Make | In-House Production | |||
| Gear Box Teeth-Gear Process | Alloy Steel. (EN-31 / E- 8) | |||
| Overall Dimensions(in mm) | 1300 (W) X 1280 (L) X 2452 (H) | 1300 (W) X 1280 (L) X 2452 (H) | 1300 (W) X 1280 (L) X 2452 (H) | |
| Net Weight | 1400 kg (Approx) | 1550 kg (Approx) | 1800 kg (Approx) | |
ADVANCE – PILOT ROLL COMPACTOR
ADVANCE – PILOT ROLL COMPACTOR
Yes ! I am InterestedTechnical Specification
| MACHINE | ADVANCE – 200 X 50 ROLL COMPACTOR MACHINE | ADVANCE – 200 X 75 ROLL COMPACTOR MACHINE | ADVANCE – 200 X 100 ROLL COMPACTOR MACHINE |
|---|---|---|---|
| Model | AE – PRC – 200 x 50 | AE – PRC – 200 x 75 | AE – PRC – 200 x 100 |
| Output | 25 to 100 Kg. /Hr.* | 25 to 150 Kg. /Hr.* | 50 to 200 Kg. /Hr.* |
| Roller size | DIA 200 mm x 50 mm Width | DIA 200 mm x 75 mm Width | DIA 200 mm x 100 mm Width |
| Roller Material Used | SS-410 / O.H.N.S. (Applicable in Pharma) | ||
| Roller Plating Type | Only on Above Rollers require an Electro Less Nickel Plating Coating (E. L.N.P.) (Layer Thickness : 20 -25 Micron) | ||
| Optional Roller | Stainless Steel –316.(220 Grit Mirror Finish) | ||
| All Contact Part material Used | Stainless Steel –316.(220 Grit Mirror Finish) | ||
| Non- Contact Part material Used | Stainless Steel- 304. (240 Grit Matt Finish) | ||
| Roller surface | Corrugated Type (Specific) | ||
| Optional Roller Available | Plain / Knurling / Briquetted. (S.S. – 316 / S.S. – 410 / OHNS As per Requirement. | ||
| Roller Speed | 1 to 20 RPM. (AC – VFD for Variable Speed) | ||
| Optional Required Variable Speed. | Main Motor Speed Variation through AC – Variable Frequency Drive Unit. (1 To 25 RPM) | ||
| Feeder screw speed (Attach AC VFD) | 10 to 110 RPM | ||
| Roller Motor | 5.0 HP / 960 RPM / 3 Ph. / 415 V / 50 Hz. | 7.5 H. P. / 960 RPM / 3Ph. / 415 V / 50 Hz. | |
| Feeder screw Drive motor | 3 HP / 1440 RPM / 3 Ph. / 415 V / 50 Hz. | 5.0 HP / 1440 RPM / 3 Ph. / 415 V / 50 Hz. | |
| Gear Box Make | In-House Production | ||
| Gear Box Teeth-Gear Process | Alloy Steel. (EN-31 / E- 8) | ||
| Overall Dimensions(Size in MM) | 1170(W) X1180(L) X2052(H) | 1170(W) X 1210(L) X2052(H) | 1170(W) X 1240(L) X 2052(H) |
| Net Weight | 1100 kg (Approx) | 1130 kg (Approx) | 1200 kg (Approx) |
ADVANCE – COMMERCIAL VIBRO SHIFTER
ADVANCE – COMMERCIAL VIBRO SHIFTER
Yes ! I am InterestedTechnical Specifications
| Machine cGMP Model | Vibro Shifter 48’’ | Vibro Shifter 60’’ | Vibro Shifter 72’’ |
| MODEL | AE – VS – 48 | AE – VS – 60 | AE – VS – 72 |
| Machine Contact Part | Stainless Steel – 316. (220 Grit Mirror Finish) | ||
| Machine Non Contact Part | Stainless Steel – 304. (220 Gritt Matt Finish) | ||
| Screens / Sieve Make | Stainless Steel – 316 With Silicon Molded Gasket / white Neoprene Rubber Gasket. | ||
| Screen Dia. | 450 MM DIA | 550 MM DIA | 610 MM DIA |
| Capacity/Hour * | 5 to 25 Kg. / Hr. | 10 to 50 Kg./ Hr. | 10 to 100 Kg./ Hr. |
| Top Lid | Stainless Steel -316. With Silicon Gasket white Neoprene Rubber Gasket. | ||
| Charging Height | 400 + 5 mm. | 500 + 5 mm. | 600 + 5 mm. |
| Discharging Height | 290 + 5 mm. | 300 + 5 mm. | 320 + 5 mm. |
| Electric Motor | 0.5 H. P. / 1440 RPM / 3 Phase / 415 Volt. | ||
ADVANCE – PILOT VIBRO SHIFTER
ADVANCE – PILOT VIBRO SHIFTER
Yes ! I am InterestedTechnical Specifications
| Machine cGMP Model | Vibro Shifter 24’’ | Vibro Shifter 30’’ | Vibro Shifter 36’’ |
| MODEL | AE – VS – 24 | AE – VS – 30 | AE – VS – 36 |
| Machine Contact Part | Stainless Steel – 316. (220 Grit Mirror Finish) | ||
| Machine Non Contact Part | Stainless Steel – 304. (220 Gritt Matt Finish) | ||
| Screens / Sieve Make | Stainless Steel – 316 With Silicon Molded Gasket / white Neoprene Rubber Gasket. | ||
| Screen Dia. | 610 MM DIA | 750 MM DIA | 300 MM DIA |
| Capacity/Hour * | 10 To 100 Kg./Hr. | 50 To 300 Kg. | 5 to 20 Kg./ Hr. |
| Top Lid | Stainless Steel -316. With Silicon Gasket white Neoprene Rubber Gasket. | ||
| Charging Height | 600 + 5 mm. | Mini: 2 Deck. Maxi: 7 Deck | 290 + 5 mm. |
| Discharging Height | 320 + 5 mm. | Manually. | 150 + 5 mm. |
| Electric Motor | 0.5 H. P. / 1440 RPM / 3 Phase / 415 Volt. | 0.25 H.P. / 1- Phase–230 Volt. | 0.5 H. P. / 1440 RPM / 3 Phase / 415 Volt. |
ADVANCE – COMMERCIAL ROTARY AIR LOCK VALVE
ADVANCE – COMMERCIAL ROTARY AIR LOCK VALV
Yes ! I am Interested
ADVANCE – COMMERCIAL POWDER TRANSFER SYSTEM
ADVANCE – COMMERCIAL POWDER TRANSFER SYSTEM
Yes ! I am Interested
ADVANCE – COMMERCIAL DE-DUSTING MACHINE
ADVANCE – COMMERCIAL DE-DUSTING MACHINE
Yes ! I am InterestedTechnical Specifications
| MODEL | AE – ETDD – 9 | AE – ETDD – 12 | AE – ETDD – 15 |
|---|---|---|---|
| Contact Part | Stainless Steel – 316 | ||
| Non Contact Part | Stainless Steel – 304 | ||
| Capacity/Hour* | Up to 2,50,000 Tablet/Hr. | ||
| Minimum Diameter of Tablet | 5 MM. | ||
| Maximum Diameter of Tablet | 16 MM. | ||
| Note | If require 18 MM to 25 MM Tablet Diameter, then above Out-put capacity will be Fluctuation. | ||
| Electric Motor | 0.25 H.P. / 1440 RPM / 415 Volt / 3 Phase / 50 Hz. | ||
| Power Supply (Client Scope) | 3-Phase/ 50 Hz. / 415 Volt. Cable Size: 1.5 MM/4Cores. | ||
| Machine Dimention (Approx) | 560(L) X 450(W) X 1150(H) | 560(L) X 450(W) X 1450(H) | 560(L) X 450(W) X 1750(H) |
| Machine Weight (Approx) | 90Kg. to 120Kg. | ||
ADVANCE – PILOT DE-DUSTING MACHINE
ADVANCE – PILOT DE-DUSTING MACHINE
Yes ! I am InterestedTechnical Specifications
| MODEL | AE – TDD – VIBRO | AE – TDD – BRUSHING | AE – ETDD – 6 |
|---|---|---|---|
| Contact Part | Stainless Steel – 316 | ||
| Non Contact Part | Stainless Steel – 304 | ||
| Capacity/Hour* | Up to 2,00,000 Tablet/Hr. | Up to 2,50,000 Tablet/Hr. | |
| Minimum Diameter of Tablet | 5 MM. | ||
| Maximum Diameter of Tablet | 25 MM. | 16 MM. | |
| Note | If require 18 MM to 25 MM Tablet Diameter, then above Out-put capacity will be Fluctuation. | If require 26 MM to 40 MM Tablet Diameter, then above Out-put capacity will be Fluctuation. | |
| Electric Motor | 0.25 H.P. / 1440 RPM / 415 Volt / 3 Phase / 50 Hz. | ||
| Power Supply (Client Scope) | 3-Phase/ 50 Hz. / 415 Volt. Cable Size: 1.5 MM/4Cores. | ||
| Machine Dimention (Approx) | 450(L) X 450(W) X 800(H) | 560(L) X 450(W) X 850(H) | |
| Machine Weight (Approx) | 70 Kg. | 90Kg. to 120Kg. | |
ADVANCE – PILOT ROTARY TABLETING COMPRESSION
ADVANCE – PILOT ROTARY TABLETING COMPRESSION
Yes ! I am InterestedTechnical Specifications
| MODEL | AE-SRTC-16 | AE-SRTC-20 | AE–DRTC-27 |
|---|---|---|---|
| Tooling | “D” | “D” | “D” |
| No. of Station | 16 stn. | 20 stn. | 27 stn. |
| Hopper & Discharge Chute | Stainless Steel – 316. | Stainless Steel – 316, 220 Grit Mirror Finish | |
| Non Contact Part | Stainless Steel – 304. Some Parts E.L.N.P & Nickel Chroming. | ||
| Operating Force | 10 Ton | ||
| Max. Tablet Diameter | 23 MM | ||
| Max. Depth of fill | 20 MM | ||
| Output Tab./Hour | 17,000 to 50,000 Tablet / Hr. | 40000 To 125000 Tablets/ Hr. | |
| Electric Motor | 2 HP / 960 RPM / 415 V. | 3.5 K.W./5 HP | |
| Overall Dimensions (in mm) | 975 X 1050 X 1720 (H) | 109 X 109 X 182 (H) | |
| Net Weight | 1050 kg | 1100 kg | 1300 kg |
ADVANCE – COMMERCIAL ROTARY TABLETING COMPRESSION
ADVANCE – COMMERCIAL ROTARY TABLETING COMPRESSION
Yes ! I am InterestedTechnical Specifications
| MODEL | AE – DRTC – 35 | AE – DRTC – 45 |
|---|---|---|
| No. of Stations | 35 | 45 |
| Type of Tooling | B | BB |
| Discharge Chute & Hopper | Stainless Steel – 316. 220 Grit Mirror Finish | |
| Turret & Die Plate | SG Iron400 / 12. Chrome or (E.L.N.P.) Electro less Nickel Plating. (Optional SS-316) | |
| * Output Tablets / Hr. Minimum Maximum | 55000 155000 | 70000 210000 |
| Max. Operating Pressure | 6.5 Tons | |
| Max. Tablet Diameter | 16 MM | 11.11 MM |
| Max. Depth of Fill | 17.5 MM | 17.5 MM |
| Upper Punch Penetration | 1.5 to 8 mm | |
| Main Electric Motor | ||
| Overall Dimensions (cm) | 109 x 109 x 182H | 109 x 109 x 182 H |
| Net Weight | 1150 kg | 1200 kg |
| Case Dimension (cm) | 131x137x204 H | |
| Gross Weight | 1350 kg | 1400 kg |
ADVANCE – TABLET INSPECTION MACHINE
ADVANCE – TABLET INSPECTION MACHINE
Yes ! I am InterestedTechnical Specifications
| MACHINE | ADVANCE – TABLET INSPECTION MACHINE |
|---|---|
| Model | AE – TIM |
| Electric Motor | 0.25HP / 1440 RPM / 3 Ph. |
| Belt Width | 145 mm |
| Vibration Pad | Manually. |
| Operation | Direct On Load Starter (L & T Make) |
| (Otional) PLC | Allen Bradley |
| (Optional) HMI / MMI | LEP Make. Size:4 x 5″ (In Inch) |
| Machine Dimention | 540mm(w) X 1955 mm(L) X 1270mm(H) |
ADVANCE – COMMERCIAL RAPID MIXER GRANULATOR
ADVANCE – COMMERCIAL RAPID MIXER GRANULATOR
Yes ! I am InterestedTechnical Specifications
| MODEL | AE-RMG – 500 LITERS | AE-RMG – 600 LITERS | AE-RMG – 900 LITERS |
|---|---|---|---|
| Gross Volume | 600 Liters | 700 Liters | 1000 Liters |
| Working Volume | 500 Liters (200 kg.) | 600 Liters (400 kg.) | 900 Liters (600 kg.) |
| All Contact Parts | Stainless Steel 316. / 316 L SA 270 Grit Mirror Finish. | ||
| All Non Contact Parts | 304/ Mild Steel cladded with SS 304. SA 240 Grit Matt Finish. | ||
| Gaskets | Food Grade Silicon Rubber Gasket / White Neoprene Rubber Gasket. | ||
| Main Impeller Motor | 10.0 H.P. / 1440 RPM Dual Speed | 15.0 H.P. / 1440 RPM Dual Speed | 20.0 H.P. / 1440 RPM Dual Speed |
| Chopper Motor | 5.0 H.P. 2880RPM Dual Speed | 5.0 H.P. 2880RPM Dual Speed | 7.5 H.P. 2880RPM Dual Speed |
| Gear Box | Size: 7”, Ratio: 10: 1 | Size: 8”, Ratio: 10: 1 | |
| Control & Operation | Manually Operated Control panel through Push Button, Timer, Indicators & Selector Switch. Emergency / Discharge / Limit Switch / Pneumatic. | ||
| Optional Operation | Programmable Logic Controller / 1200: Allen Bradley. HMI/MMI Make: KEP. Speed variable. Interlock, Alarms, Recipe Edit /Save. Security etc. | ||
| Pneumatic Parts | All Pneumatic Cylinder & Solenoid Valve make: Jenatics / Aira / Festo Make. | ||
| Compressed Air | Minimum 4.5 Kg/cm2 Maximum 8.0 Kg/cm2 Continues Air Pressure required. (Client Scope) | ||
| Power Required | 24.0 KW/ 415 Volts/ 3-Phase – AC | 30.0 KW/ 415 Volts/ 3-Phase – AC | 40.0 KW/ 415 Volts/ 3-Phase – AC |
ADVANCE – PILOT RAPID MIXER GRANULATOR
ADVANCE – PILOT RAPID MIXER GRANULATOR
Yes ! I am InterestedTechnical Specifications
| MODEL | AE-RMG – 100 LITERS | AE-RMG – 200 LITERS |
|---|---|---|
| Gross Volume | 50 Liters | 50 Liters |
| Working Volume | 42 Liters | 42 Liters |
| All Contact Parts | Stainless Steel 316. / 316 L SA 270 Grit Mirror Finish. | |
| All Non Contact Parts | 304/ Mild Steel cladded with SS 304. SA 240 Grit Matt Finish. | |
| Gaskets | Food Grade Silicon Rubber Gasket / White Neoprene Rubber Gasket. | |
| Main Impeller Motor | 5.0 H.P./ 7.5 H.P. Dual Speed | |
| Chopper Motor | 2.0 H.P. / 3.0 H.P. Dual Speed | |
| Gear Box | Size: 8”, Ratio: 10: 1 | |
| Control & Operation | Manually Operated Control panel through Push Button, Timer, Indicators & Selector Switch. Emergency / Discharge / Limit Switch / Pneumatic. | |
| Optional Operation | Programmable Logic Controller / 1200: Allen Bradley. HMI/MMI Make: KEP. Speed variable. Interlock, Alarms, Recipe Edit /Save. Security etc. | |
| Pneumatic Parts | All Pneumatic Cylinder & Solenoid Valve make: Jenatics / Aira / Festo Make. | |
| Compressed Air | Minimum 4.5 Kg/cm2 Maximum 8.0 Kg/cm2 Continues Air Pressure required. (Client Scope) | |
| Power Required | 7.0 KW / 415 Volts / 3 – Phase AC / 50 Hz. | |
ADVANCE – COMMERCIAL FLUID BED DRYER
ADVANCE – COMMERCIAL FLUID BED DRYER
Yes ! I am InterestedTechnical Specifications
| MODEL | AE – FBD -200 KG. | AE – FBD – 250 KG. |
|---|---|---|
| Capacity | 200 Kg. | 250 Kg. |
| Contact Parts | Stainless Steel 316. / 316 L SA 270 Grit Mirror Finish. | |
| Non Contact Parts | 304/ Mild Steel cladded with SS 304. SA 240 Grit Matt Finish. | |
| Gaskets | Food Grade Silicon Rubber Gasket / White Neoprene Rubber Gasket. | |
| Main Motor | 10.0 H.P. / 20.0 H.P. /2880 RPM/3–Phase/ 415 Volt. | |
| Tube for Seal | As per Model & Bowl Size. Use Inflatable Tube Silicon Gasket with PU connection. / White Neoprene Rubber Gasket Food Graded. | |
| View Glass | 200 MM DIA Toughen Glass | |
| Heater Arrangement | Steam Heater / Electric Heating in Both Operations. | |
| Finger Bag | 3 Micron size of Finger Bag as per FBD Models. (Imported Cotton) | |
| Finger Bag Shaking | In All Models Finger Bag Up / Down through Pneumatic Cylinder. Shaking in Auto / Timer Based. | |
| Control – Operation | Manually Operated Control panel through Push Button, Timer, Indicators & Selector Switch. Emergency / Discharge / Limit Switch / Pneumatic. | |
| Optional Operation | Programmable Logic Controller / 1200: Allen Bradley. HMI/MMI Make: KEP. Speed variable. Interlock, Alarms, Recipe Edit /Save. Security etc. | |
| Pneumatic Parts | All Pneumatic Cylinder & Solenoid Valve make: Jenatics / Aira / Festo Make. | |
| Compressed Air | Minimum 4.5 Kg/cm2 Maximum 8.0 Kg/cm2 Continues Air Pressure required. (Client Scope) | |
ADVANCE – PILOT FLUID BED DRYER
ADVANCE – PILOT FLUID BED DRYER
Yes ! I am InterestedTechnical Specifications
| MODEL | AE – FBD -60 KG. | AE – FBD – 120 KG. |
|---|---|---|
| Capacity | 60 Kg. | 120 Kg. |
| Contact Parts | Stainless Steel 316. / 316 L SA 270 Grit Mirror Finish. | |
| Non Contact Parts | 304/ Mild Steel cladded with SS 304. SA 240 Grit Matt Finish. | |
| Gaskets | Food Grade Silicon Rubber Gasket / White Neoprene Rubber Gasket. | |
| Main Motor | 2.0 H.P./ 7.5 H.P./2880 RPM/3–Phase/415Volt. | 10.0 H.P. / 20.0 H.P. /2880 RPM/3–Phase/ 415 Volt. |
| Tube for Seal | As per Model & Bowl Size. Use Inflatable Tube Silicon Gasket with PU connection. / White Neoprene Rubber Gasket Food Graded. | |
| View Glass | 200 MM DIA Toughen Glass | |
| Heater Arrangement | Steam Heater / Electric Heating in Both Operations. | |
| Finger Bag | 3 Micron size of Finger Bag as per FBD Models. (Imported Cotton) | |
| Finger Bag Shaking | In All Models Finger Bag Up / Down through Pneumatic Cylinder. Shaking in Auto / Timer Based. | |
| Control – Operation | Manually Operated Control panel through Push Button, Timer, Indicators & Selector Switch. Emergency / Discharge / Limit Switch / Pneumatic. | |
| Optional Operation | Programmable Logic Controller / 1200: Allen Bradley. HMI/MMI Make: KEP. Speed variable. Interlock, Alarms, Recipe Edit /Save. Security etc. | |
| Pneumatic Parts | All Pneumatic Cylinder & Solenoid Valve make: Jenatics / Aira / Festo Make. | |
| Compressed Air | Minimum 4.5 Kg/cm2 Maximum 8.0 Kg/cm2 Continues Air Pressure required. (Client Scope) | |
ADVANCE – LAB SCALE MULTI-MILL
ADVANCE – LAB SCALE MULTI-MILL
Yes ! I am InterestedTechnical Specifications
| MODEL | ADVANCE-LMM-100 |
|---|---|
| Output * | 20 to 100 Kg./Hr. |
| All Contact Parts | Stainless Steel – 316. (M.O.C.) |
| All Non Contact Parts | Stainless Steel – 304. (M.O.C.) |
| Optional Available Parts | Stainless Steel – 316 L / Mild Steel (M.S.) if Require. |
| Rotor Assembly Diameter | 150 mm. Approx. |
| Rotor Speed | 750 / 1500 / 2300 / 3000 RPM |
| Variable Speed (Optional) | AC- VFD with POT Meter. 1 / 2 HP. |
| Motor Capacity | 1 or 2 H.P. / 2880 RPM / 3 Phase / 415 V / 50 Hz. |
| Beaters | 6 Nos. with knife and impact edges and 2 Nos. scraper blades |
| Screen dimension | Inner Diameter 145 mm./ Height 100 mm |
| Starter Switch | “DOL” with reversible switch with OLR. |
| Optional Attachment | Available Direct Helical Shaft & Motor Alignment. |
| Material charging height | 1000 + 5 mm. |
| Material discharging | 20 to 100 Kg./Hr. |
| height | 560 + 5 mm. |
ADVANCE – LAB SCALE VIBRO SHIFTER
ADVANCE – LAB SCALE VIBRO SHIFTER
Yes ! I am InterestedTechnical Specifications
| MACHINE CGMP MODEL | VIBRO SHIFTER 12’’ | VIBRO SHIFTER 18’’ |
|---|---|---|
| MODEL | AE – VS – 12 | AE – VS – 18 |
| Machine Contact Part | Stainless Steel – 316. (220 Gritt Mirror Finish) | |
| Machine Non Contact Part | Stainless Steel – 304. (220 Gritt Matt Finish) | |
| Screens / Sieve Make | Stainless Steel – 316 With Silicon Molded Gasket / white Neoprene Rubber Gasket. | |
| Screen Dia. | 300 MM DIA | 450 MM DIA |
| Capacity/Hour * | 5 to 20 Kg./Hr. | 5 to 25 Kg./Hr. |
| Top Lid | Stainless Steel -316. With Silicon Gasket white Neoprene Rubber Gasket. | |
| Charging Height | 290 + 5 mm. | 400 + 5 mm. |
| Discharging Height | 150 + 5 mm. | 290 + 5 mm. |
| Electric Motor | 0.5 H. P. / 1440 RPM / 3 Phase / 415 Volt. | |
ADVANCE – LAB SCALE RAPID MIXER GRANULATOR
ADVANCE – LAB SCALE RAPID MIXER GRANULATOR
Yes ! I am InterestedTechnical Specifications
| MODEL | AE-RMG – 10 LITERS | AE-RMG – 20 LITERS | AE-RMG – 30 LITERS | AE-RMG – 50 LITERS |
|---|---|---|---|---|
| Gross Volume | 10 Liters | 20 Liters | 30 Liters | 50 Liters |
| Working Volume | 7 Liters | 14 Liters | 23 Liters | 42 Liters |
| All Contact Parts | Stainless Steel 316. / 316 L SA 270 Grit Mirror Finish. | |||
| All Non Contact Parts | 304/ Mild Steel cladded with SS 304. SA 240 Grit Matt Finish. | |||
| Gaskets | Food Grade Silicon Rubber Gasket / White Neoprene Rubber Gasket. | |||
| Main Impeller Motor | 1.0 H.P. / 2.0 H.P. Dual Speed | 2.0 H.P./ 3.0 H.P. Dual Speed | ||
| Chopper Motor | 0.5 H.P./ 1.0 H.P. Dual Speed | 1 H.P. Dual Speed | 1H.P. Dual Speed | |
| Gear Box | Size: 6”, Ratio: 10: 1 | Size: 7”, Ratio: 10: 1 | ||
| Control & Operation | Manually Operated Control panel through Push Button, Timer, Indicators & Selector Switch. Emergency / Discharge / Limit Switch / Pneumatic. | |||
| Optional Operation | Programmable Logic Controller / 1200: Allen Bradley. HMI/MMI Make: KEP. Speed variable. Interlock, Alarms, Recipe Edit /Save. Security etc. | |||
| Pneumatic Parts | All Pneumatic Cylinder & Solenoid Valve make: Jenatics / Aira / Festo Make. | |||
| Compressed Air | Minimum 4.5 Kg/cm2 Maximum 8.0 Kg/cm2 Continues Air Pressure required. (Client Scope) | |||
| Power Required | 3.0 KW / 415 Volts / 3 – Phase AC / 50 Hz. | 5.0 KW / 415 Volts / 3 – Phase AC / 50 Hz. | ||
ADVANCE – LAB SCALE FLUID BED DRYER
ADVANCE – LAB SCALE FLUID BED DRYER
Yes ! I am InterestedTechnical Specifications
| MODEL | AE – FBD -5 KG. | AE – FBD – 10 KG. | AE – FBD -20 KG. |
|---|---|---|---|
| Capacity | 5 Kg. | 10 Kg. | 20 Kg. |
| Contact Parts | Stainless Steel 316. / 316 L SA 270 Grit Mirror Finish. | ||
| Non Contact Parts | 304/ Mild Steel cladded with SS 304. SA 240 Grit Matt Finish. | ||
| Gaskets | Food Grade Silicon Rubber Gasket / White Neoprene Rubber Gasket. | ||
| Main Motor | 1.0 H.P./ 2.0 H.P./2880 RPM/3–Phase/415Volt. | 2.0 H.P./ 7.5 H.P./2880 RPM/3–Phase/415Volt. | |
| Tube for Seal | As per Model & Bowl Size. Use Inflatable Tube Silicon Gasket with PU connection. / White Neoprene Rubber Gasket Food Graded. | ||
| View Glass | 100 MM DIA Toughen Glass. | ||
| Heater Arrangement | Steam Heater / Electric Heating in Both Operations. | ||
| Finger Bag | 3 Micron size of Finger Bag as per FBD Models. (Imported Cotton) | ||
| Finger Bag Shaking | In All Models Finger Bag Up / Down through Pneumatic Cylinder. Shaking in Auto / Timer Based. | ||
| Control – Operation | Manually Operated Control panel through Push Button, Timer, Indicators & Selector Switch. Emergency / Discharge / Limit Switch / Pneumatic. | ||
| Optional Operation | Programmable Logic Controller / 1200: Allen Bradley. HMI/MMI Make: KEP. Speed variable. Interlock, Alarms, Recipe Edit /Save. Security etc. | ||
| Pneumatic Parts | All Pneumatic Cylinder & Solenoid Valve make: Jenatics / Aira / Festo Make. | ||
| Compressed Air | Minimum 4.5 Kg/cm2 Maximum 8.0 Kg/cm2 Continues Air Pressure required. (Client Scope) | ||
ADVANCE – LAB SCALE ROLL COMPACTOR MACHINE
ADVANCE – LAB SCALE ROLL COMPACTOR MACHINE
Yes ! I am InterestedTechnical Specification
| MACHINE | ADVANCE – 100 X 25 LAB SCALE ROLL COMPACTOR MACHINE |
|---|---|
| Model | AE – LRC – 100 x 25 |
| Output | 5 to 20 Kg. /Hr.* |
| Roller size | DIA 100 MM x 25 MM Width |
| Roller Material Used | SS-410 / O.H.N.S. (Applicable in Pharma) |
| Roller Plating Type | Only on Above Rollers require an Electro Less Nickel Plating Coating (E. L.N.P.) (Layer Thickness : 20 -25 Micron) |
| Optional Roller | Stainless Steel –316.(220 Grit Mirror Finish) |
| All Contact Part material Used | Stainless Steel –316.(220 Grit Mirror Finish) |
| Non- Contact Part material Used | Stainless Steel- 304. (240 Grit Matt Finish) |
| Roller surface | Corrugated Type (Specific) |
| Optional Roller Available | Plain / Knurling / Briquetted. (S.S. – 316 / S.S. – 410 / OHNS As per Requirement. |
| Roller Speed | 1 to 20 RPM. (AC – VFD for Variable Speed) |
| Optional Required Variable Speed. | Main Motor Speed Variation through AC – Variable Frequency Drive Unit. (1 To 25 RPM) |
| Feeder screw speed (Attach AC VFD) | 10 to 110 RPM |
| Roller Motor | 3.0 HP /1440RPM/3Ph./415V/ 50Hz |
| Feeder screw Drive motor | 1.0 HP/ 1440RPM/3Ph./415V/50Hz |
| Gear Box Make | In-House Production |
| Gear Box Teeth-Gear Process | Alloy Steel. (EN-31 / E- 8) |
| Overall Dimensions(Size in MM) | 970 (W) X 1020 (L) X 1300 (H) |
| Net Weight | 400 kg (Approx) |
ADVANCE – LAB SCALE ROTARY TABLET COMPRESSION MACHINE
ADVANCE – LAB SCALE ROTARY TABLET COMPRESSION MACHINE
Yes ! I am InterestedTechnical Specifications
| MODEL | AE- MINI PRESS – 8 – D | AE- LAB PRESS – 10 – B | AE – MULTI – TOOLING – 12 |
|---|---|---|---|
| No. Of Station | 8 | 10 | “D”/”B”/”BB” |
| Type Of Tooling | D | B | 12 Stn. |
| Output Tablets / Hour | 4800 To 14000 | 6000 To 18000 | 2,000 To 7,200 |
| Maximum Operating Pressure | 6 Ton | ||
| Max. Operating Pre-Comp. Pressure | 1 Ton | ||
| Maximum Tablet Diameter | 19 Mm | 16 Mm | |
| Maximum Depth Of Fill | 20.5 Mm | 17.5 Mm | |
| Applicable only for Multi-Tooling D / B / BB Lab Press Machine | Maximum Tablet Diameter for “D” Tooling | 25.0 mm | |
| Maximum Tablet Diameter for “B” Tooling | 16.0 mm | ||
| Maximum Tablet Diameter for “BB” Tooling | 11. 11 mm | ||
| Maximum Depth Of Fill “D” Tooling | 20.5mm | ||
| Maximum Depth Of Fill “B” Tooling | 17.5mm | ||
| Maximum Depth Of Fill “BB” Tooling | 17.5mm | ||
| Upper Punch Penetration | 2 To 6 Mm | ||
| Power | 2 H.P. / 3 – Phase / 1440 RPM / 50 Hz. | ||
| Overall Dimensions (In Mm) | 810 X 650 X 1190 H | ||
| Net Weight | 380 Kg | 385 Kg | 400 Kg. |