ADVANCE – LAB SCALE MULTI-MILL
ADVANCE – LAB SCALE MULTI-MILL
Yes ! I am InterestedTechnical Specifications
| MODEL | ADVANCE-LMM-100 |
|---|---|
| Output * | 20 to 100 Kg./Hr. |
| All Contact Parts | Stainless Steel – 316. (M.O.C.) |
| All Non Contact Parts | Stainless Steel – 304. (M.O.C.) |
| Optional Available Parts | Stainless Steel – 316 L / Mild Steel (M.S.) if Require. |
| Rotor Assembly Diameter | 150 mm. Approx. |
| Rotor Speed | 750 / 1500 / 2300 / 3000 RPM |
| Variable Speed (Optional) | AC- VFD with POT Meter. 1 / 2 HP. |
| Motor Capacity | 1 or 2 H.P. / 2880 RPM / 3 Phase / 415 V / 50 Hz. |
| Beaters | 6 Nos. with knife and impact edges and 2 Nos. scraper blades |
| Screen dimension | Inner Diameter 145 mm./ Height 100 mm |
| Starter Switch | “DOL” with reversible switch with OLR. |
| Optional Attachment | Available Direct Helical Shaft & Motor Alignment. |
| Material charging height | 1000 + 5 mm. |
| Material discharging | 20 to 100 Kg./Hr. |
| height | 560 + 5 mm. |
ADVANCE – LAB SCALE VIBRO SHIFTER
ADVANCE – LAB SCALE VIBRO SHIFTER
Yes ! I am InterestedTechnical Specifications
| MACHINE CGMP MODEL | VIBRO SHIFTER 12’’ | VIBRO SHIFTER 18’’ |
|---|---|---|
| MODEL | AE – VS – 12 | AE – VS – 18 |
| Machine Contact Part | Stainless Steel – 316. (220 Gritt Mirror Finish) | |
| Machine Non Contact Part | Stainless Steel – 304. (220 Gritt Matt Finish) | |
| Screens / Sieve Make | Stainless Steel – 316 With Silicon Molded Gasket / white Neoprene Rubber Gasket. | |
| Screen Dia. | 300 MM DIA | 450 MM DIA |
| Capacity/Hour * | 5 to 20 Kg./Hr. | 5 to 25 Kg./Hr. |
| Top Lid | Stainless Steel -316. With Silicon Gasket white Neoprene Rubber Gasket. | |
| Charging Height | 290 + 5 mm. | 400 + 5 mm. |
| Discharging Height | 150 + 5 mm. | 290 + 5 mm. |
| Electric Motor | 0.5 H. P. / 1440 RPM / 3 Phase / 415 Volt. | |
ADVANCE – LAB SCALE RAPID MIXER GRANULATOR
ADVANCE – LAB SCALE RAPID MIXER GRANULATOR
Yes ! I am InterestedTechnical Specifications
| MODEL | AE-RMG – 10 LITERS | AE-RMG – 20 LITERS | AE-RMG – 30 LITERS | AE-RMG – 50 LITERS |
|---|---|---|---|---|
| Gross Volume | 10 Liters | 20 Liters | 30 Liters | 50 Liters |
| Working Volume | 7 Liters | 14 Liters | 23 Liters | 42 Liters |
| All Contact Parts | Stainless Steel 316. / 316 L SA 270 Grit Mirror Finish. | |||
| All Non Contact Parts | 304/ Mild Steel cladded with SS 304. SA 240 Grit Matt Finish. | |||
| Gaskets | Food Grade Silicon Rubber Gasket / White Neoprene Rubber Gasket. | |||
| Main Impeller Motor | 1.0 H.P. / 2.0 H.P. Dual Speed | 2.0 H.P./ 3.0 H.P. Dual Speed | ||
| Chopper Motor | 0.5 H.P./ 1.0 H.P. Dual Speed | 1 H.P. Dual Speed | 1H.P. Dual Speed | |
| Gear Box | Size: 6”, Ratio: 10: 1 | Size: 7”, Ratio: 10: 1 | ||
| Control & Operation | Manually Operated Control panel through Push Button, Timer, Indicators & Selector Switch. Emergency / Discharge / Limit Switch / Pneumatic. | |||
| Optional Operation | Programmable Logic Controller / 1200: Allen Bradley. HMI/MMI Make: KEP. Speed variable. Interlock, Alarms, Recipe Edit /Save. Security etc. | |||
| Pneumatic Parts | All Pneumatic Cylinder & Solenoid Valve make: Jenatics / Aira / Festo Make. | |||
| Compressed Air | Minimum 4.5 Kg/cm2 Maximum 8.0 Kg/cm2 Continues Air Pressure required. (Client Scope) | |||
| Power Required | 3.0 KW / 415 Volts / 3 – Phase AC / 50 Hz. | 5.0 KW / 415 Volts / 3 – Phase AC / 50 Hz. | ||
ADVANCE – LAB SCALE FLUID BED DRYER
ADVANCE – LAB SCALE FLUID BED DRYER
Yes ! I am InterestedTechnical Specifications
| MODEL | AE – FBD -5 KG. | AE – FBD – 10 KG. | AE – FBD -20 KG. |
|---|---|---|---|
| Capacity | 5 Kg. | 10 Kg. | 20 Kg. |
| Contact Parts | Stainless Steel 316. / 316 L SA 270 Grit Mirror Finish. | ||
| Non Contact Parts | 304/ Mild Steel cladded with SS 304. SA 240 Grit Matt Finish. | ||
| Gaskets | Food Grade Silicon Rubber Gasket / White Neoprene Rubber Gasket. | ||
| Main Motor | 1.0 H.P./ 2.0 H.P./2880 RPM/3–Phase/415Volt. | 2.0 H.P./ 7.5 H.P./2880 RPM/3–Phase/415Volt. | |
| Tube for Seal | As per Model & Bowl Size. Use Inflatable Tube Silicon Gasket with PU connection. / White Neoprene Rubber Gasket Food Graded. | ||
| View Glass | 100 MM DIA Toughen Glass. | ||
| Heater Arrangement | Steam Heater / Electric Heating in Both Operations. | ||
| Finger Bag | 3 Micron size of Finger Bag as per FBD Models. (Imported Cotton) | ||
| Finger Bag Shaking | In All Models Finger Bag Up / Down through Pneumatic Cylinder. Shaking in Auto / Timer Based. | ||
| Control – Operation | Manually Operated Control panel through Push Button, Timer, Indicators & Selector Switch. Emergency / Discharge / Limit Switch / Pneumatic. | ||
| Optional Operation | Programmable Logic Controller / 1200: Allen Bradley. HMI/MMI Make: KEP. Speed variable. Interlock, Alarms, Recipe Edit /Save. Security etc. | ||
| Pneumatic Parts | All Pneumatic Cylinder & Solenoid Valve make: Jenatics / Aira / Festo Make. | ||
| Compressed Air | Minimum 4.5 Kg/cm2 Maximum 8.0 Kg/cm2 Continues Air Pressure required. (Client Scope) | ||
ADVANCE – LAB SCALE ROLL COMPACTOR MACHINE
ADVANCE – LAB SCALE ROLL COMPACTOR MACHINE
Yes ! I am InterestedTechnical Specification
| MACHINE | ADVANCE – 100 X 25 LAB SCALE ROLL COMPACTOR MACHINE |
|---|---|
| Model | AE – LRC – 100 x 25 |
| Output | 5 to 20 Kg. /Hr.* |
| Roller size | DIA 100 MM x 25 MM Width |
| Roller Material Used | SS-410 / O.H.N.S. (Applicable in Pharma) |
| Roller Plating Type | Only on Above Rollers require an Electro Less Nickel Plating Coating (E. L.N.P.) (Layer Thickness : 20 -25 Micron) |
| Optional Roller | Stainless Steel –316.(220 Grit Mirror Finish) |
| All Contact Part material Used | Stainless Steel –316.(220 Grit Mirror Finish) |
| Non- Contact Part material Used | Stainless Steel- 304. (240 Grit Matt Finish) |
| Roller surface | Corrugated Type (Specific) |
| Optional Roller Available | Plain / Knurling / Briquetted. (S.S. – 316 / S.S. – 410 / OHNS As per Requirement. |
| Roller Speed | 1 to 20 RPM. (AC – VFD for Variable Speed) |
| Optional Required Variable Speed. | Main Motor Speed Variation through AC – Variable Frequency Drive Unit. (1 To 25 RPM) |
| Feeder screw speed (Attach AC VFD) | 10 to 110 RPM |
| Roller Motor | 3.0 HP /1440RPM/3Ph./415V/ 50Hz |
| Feeder screw Drive motor | 1.0 HP/ 1440RPM/3Ph./415V/50Hz |
| Gear Box Make | In-House Production |
| Gear Box Teeth-Gear Process | Alloy Steel. (EN-31 / E- 8) |
| Overall Dimensions(Size in MM) | 970 (W) X 1020 (L) X 1300 (H) |
| Net Weight | 400 kg (Approx) |
ADVANCE – LAB SCALE ROTARY TABLET COMPRESSION MACHINE
ADVANCE – LAB SCALE ROTARY TABLET COMPRESSION MACHINE
Yes ! I am InterestedTechnical Specifications
| MODEL | AE- MINI PRESS – 8 – D | AE- LAB PRESS – 10 – B | AE – MULTI – TOOLING – 12 |
|---|---|---|---|
| No. Of Station | 8 | 10 | “D”/”B”/”BB” |
| Type Of Tooling | D | B | 12 Stn. |
| Output Tablets / Hour | 4800 To 14000 | 6000 To 18000 | 2,000 To 7,200 |
| Maximum Operating Pressure | 6 Ton | ||
| Max. Operating Pre-Comp. Pressure | 1 Ton | ||
| Maximum Tablet Diameter | 19 Mm | 16 Mm | |
| Maximum Depth Of Fill | 20.5 Mm | 17.5 Mm | |
| Applicable only for Multi-Tooling D / B / BB Lab Press Machine | Maximum Tablet Diameter for “D” Tooling | 25.0 mm | |
| Maximum Tablet Diameter for “B” Tooling | 16.0 mm | ||
| Maximum Tablet Diameter for “BB” Tooling | 11. 11 mm | ||
| Maximum Depth Of Fill “D” Tooling | 20.5mm | ||
| Maximum Depth Of Fill “B” Tooling | 17.5mm | ||
| Maximum Depth Of Fill “BB” Tooling | 17.5mm | ||
| Upper Punch Penetration | 2 To 6 Mm | ||
| Power | 2 H.P. / 3 – Phase / 1440 RPM / 50 Hz. | ||
| Overall Dimensions (In Mm) | 810 X 650 X 1190 H | ||
| Net Weight | 380 Kg | 385 Kg | 400 Kg. |